Summary This article describes the procedure for downloading and installing version 2.0.2.1 of the Bridgemate Pro server USB-serial converter for 32-bits versions of Microsoft Windows XP and Windows Vista. In case you experience connection problems with the Bridgemate Pro server, it is recommended the driver be updated. Introduction Version 2.0.2.1 of the Aten USB-serial converter driver has been tested successfully on 32-bits version of Microsoft Windows XP, Windows Vista and Windows 7. Version 3.7 and 3.8 of the Aten driver cd-rom contain this version of the driver (the version number of the cd-rom is written on the cd-rom itself).

Previous driver cd-roms and driver files downloaded from the internet possibly contain older versions of the driver and applying these drivers may result in problems during use. Possible symptoms are: • Error 8021 or 8018 ('There is a problem reading from or writing data to the serial port.' ) • Bridgemate Pro Control is not responding to any user action. • Windows shows a blue error screen and the computer resets afterwards. When these symptoms continuously occur on your computer and as a consequence Bridgemate Control Software cannot be used properly, the driver of the Aten USB-serial converter should be updated. Note: Only install this driver when you connect the Bridgemate Pro server to a USB port using the 'Aten USB-serial converter' which is supplied with the Bridgemate Pro server. If the Bridgemate Pro server uses a direct serial connection port or a USB-serial converter of another brand, do not use this driver.

IMPORTANT: This driver should only be used on 32-bit versions of Microsoft Windows XP, Windows Vista or Windows 7. On 64-bit operating systems Windows Vista or Windows 7,. Procedure How to verify the driver version (Windows XP/Vista/7): • Make sure the Aten USB to Serial converter is connected to one of the USB ports of your computer.

• Click on Windows Start. • Right-mouse cllick on 'My Computer' or 'Computer'. • Click 'Properties'. • Click on 'Device Manager' in section 'Tasks' (Windows Vista), or click tab 'Hardware' and then press 'Device Manager' (Windows XP).

• Double-click on 'Ports (COM & LPT)'. • Right-mouse click on 'USB to serial bridge' (the name may be slightly different depending on the current driver version), then click 'Properties'. • Click tab 'Driver' • Click button 'Driver details'. • Multiple files may be listed below 'Driver files'. Select the file that ends with the naam 'ser2pl.sys'. The version number of the file is shown below following 'File version'.

Prolific usb rsr232 adapter error 10 win10 avr freaks. Buckle's My serial controller with the usb to serial converter is jumpy. Prolific windows driver v1.

This is the version of the current driver in use. When this version number is not equal to 2.0.2.1, it is recommended the driver be updated. This also applies when the version number is higher than 2.0.2.1. How to update the driver under Windows XP: • Download the file and save it to your desktop.

• Double-click on the file to open. • Click 'Unzip', the file will be decompressed to the folder C: UC232A. Click 'Close' when finished. • Follow steps 1 through 7 as described above under 'How to verify the driver version'. • Click 'Update driver'.

• Should Windows ask for connection to Windows Update, choose 'No, not this time' and click Next. • Choose 'Install from a list or specific location (Advanced)' and click Next.

• Check the option 'Include this location in the search' and click 'Browse'. • Choose the folder C: UC232A and click 'OK'. • Click 'Next'.

• If Windows warns that this driver has not passed Windows Logo testing, click 'Continue anyway'. • Follow the instructions on the screen.

The driver will now be installed. How to update the driver under Windows Vista/Windows 7: • Download the file and save it to your desktop.

• Double-click on the file to open. • Click 'Unzip', the file will be decompressed to the folder C: UC232A. Click 'Close' when finished. • Follow steps 1 through 7 as described above under 'How to verify the driver version'. • Click 'Update driver'. • Choose 'Search my computer for drivers'.

• Press 'Browse'. • Choose the folder C: UC232A and click 'OK'. • Click 'Next'. • Follow the instructions on the screen. The driver will now be installed.

In case Windows tells you that the driver is the same or older as the driver currently in use, you should uninstall the current driver first. How to uninstall the current driver: • Follow steps 1 through 6 as described above under 'How to verify the driver version'. Download vst plugins for adobe audition 15 download free apps. • Right-mouse click on 'USB to serial bridge' (the name may be slightly different depending on the current driver version), then click 'Uninstall'.